TestPro K71E Smart Building Pro Kit Certifier

The flagship TestPro kit: everything in the Smart Building range plus full singlemode and multimode OTDR capability. Built around two TestPro CV100 platforms with capacitive touch displays, each supplied with a certificate of calibration — as are the fiber adapters.

Copper certification

• Pair of AD-CAT8.1-CH Channel Adapters
• Pair of AD-CAT8.1-PLE Permanent Link Adapters
• Pair of AD-NET-CABLE Adapters
• One CAT6A Patch Cord Adapter for Cat6A MPTL testing

AD-SM-K01 Singlemode fiber adapter test kit

• A pair of Singlemode fiber adapters with:
  • Dual wavelength light source (1310/1550nm) with integrated visual fault locator and volt meter
  • Quad waelength receiver/power meter port
  • Interchangeable FC connectors for the transmit ports
• Pair of FC-LC test reference cords for connecting the transmit port to the fiber link under test
• Interchangeable LC connectors for the receive ports
• Pair of LC-LC test reference cords for the receive side
• One LC-LC duplex coupler for setting reference

AD-MM-01 Multimode fiber adapter test kit

• A pair of Multimode fiber adapters with:
  • Dual wavelength light source (850/1300nm) with integrated visual fault locator and volt meter
  • Quad wavelength receiver/power meter port
  • Interchangeable FC connectors for the transmit ports
• Pair of FC-LC test reference cords for connecting the transmit port to the fiber link under test
• Interchangeable LC connectors for the receive ports
• Pair of LC-LC test reference cords for the receive side
• One LC-LC duplex coupler for setting reference

Singlemode and multimode OTDR

• One AD-OTDR-SM Singlemode OTDR Test Adapter, 1310nm/1550nm, SC/UPC interface
• One AD-OTDR-MM Multimode OTDR Test Adapter, 850nm/1300nm, SC/UPC interface
• One SC coupler
• One multimode and one singlemode 2m SC-LC test reference cord
• One multimode and one singlemode 150m SC-LC launch cord

Inspection, cleaning, and SC testing

• One PROBE FIBER INSP inspection scope
• One MM-SC-K01 and one SM-SC-K01 for testing SC terminated fiber
• Connector cleaning kits for 1.25mm and 2.5mm ferrules

Also included

• Two hanging straps, quick start guide, USB cable
• USB flash drive with TestDataPro results management software
• Two AC power adapters
• Hard carry case for TestPro, soft carry cases for fiber adapters

Built-in capabilities

Every TestPro Smart Building Test Kit is capable of PoE load testing, 2.5Gbps/5Gbps/10Gbps SNR testing, and network test/discovery. With the addition of an Edimax Wi-Fi USB adapter, each handset also supports WiFi analysis, discovery, and test functions.